How to use:
USING THE COOKER 1. To light the burners: Open the gas cylinder valve 1½ turns. Open the main gas valve by depressing the gas cooker control knob in and turn it towards the On/Max position (counter-clockwise) until you hear the ignition click. Make sure that the burner has been lit. Keep gas cooker control knob depressed for 10 seconds after ignition to ensure constant flame. 2. Airflow adjustment: The burner usually needs no airflow adjustment. If it should ever burn improperly, the air flow can be controlled by adjusting the air damper inside the gas cooker (under the control knob). After the gas has been ignited, adjust the air damper until slightly rounded, vigorous blue flames appear. 3. To turn the burners off: Turn the gas control knobs back to the OFF position until you hear a click. Make sure the flames are out and turn off the main gas cylinder valve as well. CARE AND MAINTENANCE Before caring for, or cleaning your cooker, make sure that the main gas valve is in an “OFF or closed” position, and the cooker control knobs are in the “OFF” position. If the cooker is still hot, wait for it to cool down before cleaning. Ensure that there are no signs of blockage (eg. debris,insects, etc) in either the burner portholes, the primary air inlet or the neck of cast iron burners. Use compressed air or a pipe cleaner wire to clear obstructions. A copper wire brush can be used to remove corrosion from the burner surfaces. Brush it afterwards lightly with cooking oil to prevent the formation of rust while storing. WE RECOMMEND THAT THIS SHOULD BE DONE AFTER EVERY COOKING SESSION IN COASTAL AREAS. Taking care of your cooker will prolong its lifespan. Check the gas hose regularly for wear or leaks. It must be replaced occasionally. Keep it away from heat sources and keep it clean. Wipe the stainless steel top and body with a dry cloth. If it is difficult to clean, use soapy water and then dry thoroughly with a dry cloth. Remove the burners in the opposite sequence to installing them. Replace the burners again once cleaned and thoroughly dried. Wash the pot holder in water and dry thoroughly before replacing. For better service and a longer service life, keep the gas cooker clean and store it in a dry place. Always disconnect the cooker from the gas cylinder when it is not in use for an extended period of time.

Ingredients:
Stainless steel